Massey Ferguson V315: External Hydraulic Valve 3 Issue

The fault indicates a malfunction associated with External Hydraulic Valve 3, which is a remote hydraulic spool valve. This is typically an electrical or connection problem at the valve's solenoid.

• 7616
• 5612
• 7622
• Interim Tier 4 (2012-2015)
• 7614
• 5611
• 7615
• 5610
• 5613
• 7620
• 5609
• 7618
• 5608
• 7619
• 7626
• 7624
• 4707
• 4708
• 4709
• 4710
• 5710SL
• 5711SL
• 5712SL
• 5713SL
• 7714
• 7715
• 7715S
• 7716
• 7716S
• 7718
• 7718S
• 7719
• 7720
• 7720S
• 7722
• 7722S
• 7724
• 7724S
• 7726
• 7726S

1. 1

   Use a compatible diagnostic tool to pull the specific alphanumeric DTC (e.g., 0A.32.12) to pinpoint the exact electrical fault

2. 2

   Inspect battery terminals and wiring for corrosion or loose connections, as general electrical issues often trigger these codes

3. 3

   Check the electrical connections directly at Solenoid Valve 3 for short circuits, shorts to earth, or open circuits

4. 4

   Check and top off hydraulic fluid levels, inspect hoses/fittings for leaks, and check for clogged hydraulic filters

1. 1

   Connect a compatible diagnostic tool to retrieve the exact sub-code to determine if the issue is an open circuit, short circuit, or current level error.

   Connect a compatible diagnostic tool to retrieve the exact sub-code to determine if the issue is an open circuit, short circuit, or current level error.

2. 2

   Inspect and clean the battery terminals and main wiring harnesses.

   Inspect and clean the battery terminals and main wiring harnesses.

3. 3

   Locate External Hydraulic Valve 3 and inspect its solenoid wiring harness. Repair any damaged wires, open circuits, or shorts to earth.

   Locate External Hydraulic Valve 3 and inspect its solenoid wiring harness. Repair any damaged wires, open circuits, or shorts to earth.

4. 4

   If the wiring is intact but a current level error or rapid shut-off error persists, replace the faulty Solenoid Valve 3.

   If the wiring is intact but a current level error or rapid shut-off error persists, replace the faulty Solenoid Valve 3.

5. 5

   If the system is experiencing physical flow issues alongside the code, replace clogged hydraulic filters and top off the hydraulic fluid.

   If the system is experiencing physical flow issues alongside the code, replace clogged hydraulic filters and top off the hydraulic fluid.

6. 6

   Bleed the hydraulic system to remove any trapped air.

   Bleed the hydraulic system to remove any trapped air.

7. 7

   Clear the DTCs using the diagnostic tool and test the remote hydraulics for proper operation.

   Clear the DTCs using the diagnostic tool and test the remote hydraulics for proper operation.