Material Note
RoHs compliant
Piston Material
ball graphite casting
Safety Function
Die Sicherheitsfunktion besteht darin, dass der Antrieb in die definierte Sicherheitsschaltstellung schaltet. Diese Schaltbewegung wird durch Belüftung der entsprechenden Druckkammer mit Druckluft erreicht. Der Wert des erzeugten Drehmoments hängt vo
Spring Material
spring steel
Housing Material
ball graphite casting
Operating Medium
Compressed air to ISO 8573-1:2010 [7:3:4]
Closing Direction
Right closing
Certification Body
TÜV Rheinland 968/FSP 2959.00/2025
Construction Set Up
Joch kinematics
Burst Pressure (bar)
18,00
Installation Position
arbitrary
Closing Cover Material
Steel
Cylinder Tube Material
Steel
Ex Ambient Temperature
-20°C <= Ta <= +80°C
LABS (PWIS) Conformity
VDMA24364-Zone III
Principle Of Operation
double acting
Flange Drilling Pattern
F1625
Tension Anchor Material
Steel
Operating Pressure (MPa)
0,3 to 0,6
Ambient Temperature (°C)
-20 to 80
Bearing Temperature (°C)
-20 to 60
Limit-stop Screw Material
Steel
Position Drive Dimensions
4500
Shaft Connection Depth (mm)
57
Safety Integrity Level (SIL)
bis SIL 3 in einer redundanten Architektur
Standard Connection To Fitting
ISO 5211
Ex Ignition Protection Type Gas
Ex h IIC T6 Gb
Ex Ignition Protection Type Dust
Ex h IIIC T85°C Db
Nominal Operating Pressure (MPa)
0,55
Note On Operating And Control Medium
Oiled operation possible (required in further operations)
Ex Protection Approval Outside Of The EU
EPL Gb (GB)
Valve Connection Corresponds To Standard
VDI/VDE 3845 (NAMUR)
Adjustable Range End Position At 0° (°)
-5 to 5
UKCA Marking (See Declaration Of Conformity)
nach UK EX Vorschriften
CE Certificate (See Declaration Of Conformity)
to EU EX protection directive (ATEX)
End-position Adjustment Range At Nominal Swivel Angle (°)
-5 to 5
Certified For Safety Function To ISO 13849 And IEC 61508 (SIL)
bis SIL 3 in einer redundanten Architektur
Rotary Torque For Nominal Operating Pressure And 0° Pivot Angle (Nm)
4780
Rotary Torque For Nominal Operating Pressure And 90° Pivot Angle (Nm)
4780
Connection Point For Positioner And Position Sensor Conforms To Standard
VDI/VDE 3845 size AA 3
Air Consumption At 0.6 MPa (6 bar, 87 psi) Per Cycle 0°-nominal Swivel Angle-0° (l)
210
