Control Type
pilot operated
Nut Material
High-alloyed stainless steels
Material Note
RoHs compliant
Control Medium
Compressed air to ISO 8573-1:2010 [7:4:-]
Cover Material
PA reinforced
Valve Function
2x3/2 closed monostable
Clamps Material
High-alloyed stainless steels
Screws Material
High-alloyed stainless steels
Setting Element
slotted screw
Sleeve Material
Aluminium wrought alloy
Housing Material
PA reinforced
Operating Medium
Compressed air to ISO 8573-1:2010 [7:4:4]
Shock Resistance
Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27
Relative Humidity
5 - 95 %
Control Air Supply
Internal
Measured Parameter
Relative pressure
Electrical Controls
AP-Schnittstelle
Integrated Function
with electric manifold module
Jet Nozzle Material
Aluminium wrought alloy
Dimensions W x L x H
12,55 mm x 150,8 mm x 68,8 mm
Oscillation Strength
Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6
Pitch Dimension (mm)
12,55
Installation Position
arbitrary
Max. Setup Height (m)
2.000
Measurement Principle
Piezoresistive
Control Pressure (MPa)
0,2 to 0,7
Ejector Characteristic
High vacuum
LABS (PWIS) Conformity
VDMA24364-C1-L
Pneumatic Connection 2
"für Schlauch Außen-Ø 5/16"""
Capture Nozzle Material
POM
Nominal Altitude Of Use
<= 2000 m NHN
Operating Pressure (MPa)
0,2 to 0,7
Signal Condition Display
yes
Ambient Temperature (°C)
-5 to 50
Bearing Temperature (°C)
-20 to 70
Connection Plate Material
PA reinforced
Regulation Screw Material
PA reinforced
Max. Number Of Valve Coils
2
Reverse Polarity Protection
yes
Inductive Protection Circuit
Integrated
Power Blackout Bridging (ms)
10
Power Consumption At 24 V DC
0,65
Corrosion Resistance Class KBK
2 - moderate corrosion stress
Max. Number Of Valve Positions
1
Construction Type Silencer Type
open
Nominal Width Laval Nozzle (mm)
0,95
Nominal Operating Pressure (MPa)
0,6
Pressure Measurement Range (MPa)
-0,1 to 0,1
Reproducibility Shifting Time FS
1
Communication Interface, Protocol
AP-COM
Note On Operating And Control Medium
Oiled operation not possible
Information About Protection Category
In mounted condition
Diagnostics Per Internal Communication
Unterspannung Elektronik/Sensoren
Permissible Voltage Fluctuation Of Load
± 10 %
Nominal Operating Voltage DC Of Load (V)
24
Operating Pressure For Max. Vacuum (MPa)
0,38
Intrinsic Power Input Operating Voltage Load
typisch 2,5 mA
UKCA Marking (See Declaration Of Conformity)
nach UK Vorschriften für EMV
CE Certificate (See Declaration Of Conformity)
nach EU-RoHS-Richtlinie
Venting Time For Nominal Operating Pressure (s)
0,39
Max. Suction Volume Flow Rate Against Atmosphere
24
Permitted Voltage Oscillations Electronics/sensors
± 10 %
Nominal Operating Voltage DC Electronics / Sensor (V)
24
Operating Pressure For Max. Suction Volume Flow (MPa)
0,4
Intrinsic Power Input Operating Voltage Electronics/sensors
typisch 27 mA
Electrical Isolation Of Outputs Between Channel - Internal Communication
yes
Potential Separation Between The Supply Voltages Electronics/sensor Technology And Load/valves
yes
