Gopart - D018D1X2500 - Joystick Cable Indemar With Ball 2.5m

This joystick cable transmits mechanical motion from the control lever to the hydraulic spool valve on a front loader. It consists of a flexible inner wire moving inside a protective outer sheath, with a ball-end fitting on each end for connection to the lever and valve. The cable converts the operator's hand movement into a linear pull or push that shifts the valve spool, directing hydraulic flow to the loader's lift or tilt circuit. A worn or stretched cable introduces slack, causing delayed or imprecise loader response. On installation, ensure the cable is routed without sharp bends and that the ball ends are fully seated in their sockets.