This upper central link connects the tractor’s top-link attachment point to the implement’s top hitch pin. It forms the upper leg of the three-point linkage, controlling the implement’s fore-aft tilt and maintaining the correct working angle of the attached tool. The link is fitted with a joint at one end and a hook at the other, both with an M36x3 thread, which secures into the tractor’s top-link ball and the implement’s top pin. A worn or bent link allows the implement to drift out of level, causing uneven depth or draft load. This replacement link is manufactured to the same thread dimensions and category 3 geometry as the original assembly, so no bushing adapters or thread reducers are needed for installation.