MANNOL® - MN77261 - Ceramic Pro 10W-40 1L

Unique, innovative synthetic engine oil with special anti-seize and wear protection properties due to the addition of synthetic esters and hexagonal boron nitride (h-BN, also known as white graphite). Suitable for all types of vehicle engines – diesel and gasoline engines, as well as four-stroke and two-stroke engines. The ether molecules are 'magnetized' to the metal surfaces due to their pronounced polarity, forming a dense and very durable oil film, while the ceramic microparticles compensate for the irregularities of the friction surfaces and effectively dissipate heat. This prevents direct contact between the metal surfaces and the wear of the individual parts even under extreme operating conditions. Dry friction during cold start (especially at extremely low temperatures) and oil shortage are eliminated, minimizing wear when starting the engine. The boundary layer formed during operation has the following properties: - high pressure resistance – allowing the engine to operate under increased loads without adverse effects; - unique antiwear, anti-scuffing wear, and antifriction properties that significantly extend engine life, save fuel, and reduce engine noise; - corrosion protection and antioxidation properties. Product features: - Optimal glide properties ensure fuel savings; - Thanks to its excellent detergent-dispersing properties and the highest thermal-oxidative stability, it effectively combats all types of deposits and keeps engine parts clean throughout the oil change interval; - The presence of ester and ceramic components in combination with optimal viscosity-temperature characteristics results in the highest oil film strength, providing excellent wear protection properties, which in conjunction with good pumpability significantly extends the life of the engine even under the toughest operating conditions; - Compatible with the finest oil filters (fine filtration): The size of the h-BN particles (not more than 0.5 µm) allows free passage through any filter and prevents deposits; - Compatible with three-way catalytic converters of gasoline and diesel engines, all types of turbochargers, and all injection systems, including common rail; - Used in long life and conventional engines. IMPORTANT: The oil product must be shaken well before use. Designed for engines in a wide range of passenger cars, light SUVs, vans, and light trucks of European and other manufacturers, for which the ACEA A3/B4 standard is required. Ideal product for tuned and heavily loaded vehicles.