STIHL - 0088-342-1504 - Function Universal Trousers Size M

Anticut trousers FUNCTION Universal in size M weigh only 1250 grams, so they are very light. The ENGTEX cut-resistant layer protects the front of the legs from chainsaw injuries (Approved cut protection according to EN 381). Durable material on the front and back of the legs protects against tearing and abrasion. Shaped knee zones and semi-elastic fibres along the seat area provide plenty of freedom of movement. Good ventilation during continuous work is ensured by breathable materials at the back of the legs. The trousers have side pockets and a back pocket. The lumbar area protection (kidney zone) prevents cooling. Cut protection zones according to EN 381. The red colour indicates areas protected by the cut-resistant insert. Cut protection Clothing with cut protection according to DIN EN 381-5 can be distinguished by such an icon. The scope and form of cut protection must be specified. The cut protection class or chainsaw speed at impact. Class 1 = 20 m/s, in the forest class 1 is mainly used, Class 2 = 24 m/s, Class 3 = 28 m/s. Anticut trousers usually offer sufficient protection against cuts, but they do not provide 100% protection, especially with a broken chain. In higher classes, the weight load related to ergonomics and thermal properties of the clothing increases. Stretch zones The use of elastic material in flex (movement) areas significantly increases wearing comfort. Ventilation inserts Integrated ventilation inserts vent body heat, providing pleasant comfort during work. Washing at 60°C STIHL clothing can be washed at 60°C. This is important not only for hygiene reasons, but also because stubborn resin stains can be washed out. Breathable material Breathable material wicks excess moisture to the outside and simultaneously absorbs fresh air inside. This significantly increases working comfort.