This front axle oil seal is an original AGCO component designed to retain lubricant and exclude contaminants at the wheel-end or final-drive housing of the host tractor. It sits in the seal bore between the rotating axle shaft and the stationary housing, maintaining a pressurized oil film that protects the bearings and gear set from moisture and debris ingress. A worn or hardened seal allows lubricant to weep past the lip, which can lead to bearing starvation and eventual spindle or hub damage. The seal is molded to match the original housing's bore geometry and shaft contact surface, so no adapter or shimming is required during installation. On reinstall, ensure the bore is clean and free of burrs, and seat the seal squarely to avoid lip distortion.