Al Ko - 112828 - Submersible Pump Drain 15000 Inox Comfort

Exceptionally efficient, compact and reliable stainless steel submersible pump AL-KO Drain 15000 Inox, thanks to large suction openings, effortlessly pumps water with suspended particles and impurities up to 35 mm in diameter. Exceptionally efficient and durable device: stainless steel submersible pump for dirty water Drain 15000 Inox. Pumps for dirty water are used when there is a need to get rid of contaminated liquids - for example, after severe floods, from contaminated ponds or tanks, and during dewatering of construction excavations. Then, in addition to water, the device must also pump impurities, which significantly increases the load on the material and the motor. It is good if it is an AL-KO pump. Thanks to the special impeller geometry, the Drain 15000 Inox model can pump even heavily soiled water with a suspended solids content of up to 5% and impurities up to 35 mm in diameter. Durable and stable construction with quadruple sealing, maintenance-free motor and a specially prepared shaft made of acid-resistant steel guarantee a long service life of AL-KO submersible pumps for dirty water. Moreover, the acid-resistant steel housing protects the pump against corrosion. Extremely efficient submersible pump for dirty water with a power of 1100 W. Exceptional impeller design enables extreme tasks to be accomplished. Universal angled connection and hose nipple included. Increased corrosion protection and stainless steel construction extend service life. Maximum impurity diameter 35 mm, capacity 15000 l/h, delivery head up to 11 m. Thanks to the convenient integrated carrying handle and a 10 m cable, as well as a low weight of only 6.8 kg, the pump can be used both mobile and stationary - of course also for clean water. Thanks to its compact dimensions of 18.5 x 20.5 x 36.6 cm, robust housing and a long-life motor, it is also ideally suited as a pond or rainwater tank pump. It offers a durable and stable construction and multi-stage sealing. Due to the large inlet openings, the AL-KO Drain 15000 Inox model copes equally well with large impurities. Both clean liquids and liquids contaminated with particles up to 35 mm in diameter are efficiently and quickly pumped out. The specially prepared motor shaft and housing made of acid-resistant steel ensure a long service life of the device. With a power of 1100 W and a capacity of up to 15000 l/h, pumping out and transferring takes place in no time. The AL-KO Drain 15000 Inox submersible pump is equipped with a float switch and automatically starts the pumping process when the appropriate water level is reached. The maximum immersion depth of the pump is 7 m. Thanks to a delivery head of up to 11 m, it can overcome even greater depths. The pump outlet has a size of 1.25 inches, which is approximately 41.9 mm. The 90° elbow connector has a universal fitting, and thanks to the included hose nipple, all available hose sizes can be connected. Note: This garden pump is not suitable for drinking water, but only for service water with a temperature below 35° C. It is also not suitable for use in salt water or water containing aggressive chemicals. Reliability for years. Thanks to the stable and robust construction with many seals and the use of stainless materials, AL-KO dirty water pumps are also excellently suited for extreme working conditions. This guarantees high durability. Great equipment. Equipped with a float switch for automatic on and off, as well as a 90° connection and a combi fitting for typical hose sizes, AL-KO dirty water pumps meet all conditions for smooth operation.