163

Merlo 163 – MD-CODER: Incorrect Memory Access Firmware Issue

Issue description

The system has detected an incorrect memory access related to the machine's flash memory and drivers. This indicates a potential software or firmware incompatibility, a requirement for a firmware update, or a hardware failure within the MD-CODER control module.

Applies to these machines

  • Turbofarmer
  • Panoramic
  • Multifarmer
  • Roto
  • 28.7
  • 33.7
  • 34.7
  • 34.10
  • 32.6

Check the cause

  1. Check the machine's power supply and inspect the relevant plugs for any signs of damage or loose connections

  2. Inspect the CAN bus communication lines for any visible damage or connectivity issues

Repair steps

  1. Connect diagnostic tool

    Connect the proprietary 'MerloDiag' diagnostic tool to the machine to interface with the MD-CODER system.

  2. Check firmware version

    Use the diagnostic software to check the current firmware version of the MD-CODER controller.

  3. Update firmware

    If the firmware is outdated or corrupt, perform a firmware update (re-flashing). Ensure a stable power supply to the machine and diagnostic laptop to prevent ECU damage during this process.

  4. Replace control module

    If reloading the software does not resolve the issue, the MD-CODER control module (circuit board) must be replaced.

  5. Clear fault code

    After the repair or replacement, use the diagnostic tool to clear the fault code and verify that the issue is resolved.

Parts you might need

(11)
  • MD-CODER Control Unit

    Exact part number must be verified by an authorized dealer using the machine's VIN.

  • Transmission Control Unit

    035965

    Example part number for models 28.7, 33.7, 34.7, 34.10, Roto

  • Example part number for models 28.7, 33.7, 34.7, 34.10, Roto

  • Example part number for models 28.7, 33.7, 34.7, 34.10, Roto

  • Transmission Control Unit

    10105827

    Example part number for models 28.7, 33.7, 34.7, 34.10, Roto

  • Transmission Control Unit

    115985

    Example part number for models 28.7, 33.7, 34.7, 34.10, Roto

  • Transmission Control Unit

    149290

    Example part number for models 28.7, 33.7, 34.7, 34.10, Roto

  • Transmission Control Unit

    MCE209B1003

    Example part number for models 28.7, 33.7, 34.7, 34.10, Roto

  • Transmission Control Unit

    MCE209B1023

    Example part number for models 28.7, 33.7, 34.7, 34.10, Roto

  • UCEV Control Unit

    073891 BT113

    Example part number for model 32.6

  • Example part number

Get help to fix this fault by requesting a quote

Browse other Merlo codes