13004

New Holland 13004 – Display: Datacard Access Failure

Issue description

The system has encountered a failure in reading from or writing to the datacard (USB flash drive or CompactFlash card). This communication failure between the machine's display unit and the removable memory card prevents the storage or retrieval of critical operational data, including yield and moisture data, prescription maps, field/job data, and guidance lines.

Applies to these machines

  • CX Series Combines
  • CR Series Combines
  • Tractors equipped with IntelliView™ or similar displays

Check the cause

  1. Power down the display completely and inspect the datacard for any physical damage.

  2. Ensure the datacard is not full (warnings are typically issued at 90% or 100% capacity, which prevents writing new data).

  3. Verify the datacard is formatted correctly to the FAT32 file system (ensure a backup is made to a computer first, as reformatting will erase all data).

  4. Test with a different, known-good USB stick or memory card (preferably OEM) to isolate if the issue is the card or the display's reader.

  5. Check if the display unit is running the latest available software version, as updates can resolve storage communication issues.

Repair steps

  1. Backup data

    Insert the datacard into a computer and back up all data. This is critical before reformatting to prevent data loss.

  2. Reformat the datacard

    On a computer, reformat the datacard to the FAT32 file system. After reformatting, safely eject the card.

  3. Test in machine

    Power down the machine's display, insert the newly formatted card, and power the system back on. Attempt to record new data or access card functions to verify if the fault has cleared.

  4. Inspect display port

    If the fault persists with a known-good, properly formatted card, power down the system and inspect the USB or card port on the display for debris, bent pins, or other physical damage.

  5. Consult dealer for display diagnostics

    If the port appears damaged or the issue remains unresolved, the display unit itself may have an internal hardware fault. Contact a New Holland dealer for advanced diagnostics and potential repair or replacement of the display unit.

Parts you might need

(4)
  • MEMORY CARD84398840

    OEM memory card

  • Computer Card

    47977312

    Replaced by 47962967

  • Replacement for 47977312

  • Memory Card / Computer Card / USB Flash Drive

    Generic high-quality USB drive or memory card formatted to FAT32

Get help to fix this fault by requesting a quote

Browse other New Holland codes