3760

New Holland 3760 – Engine ECU: Air Path Limitation Due to ECU Monitoring

Issue description

The Engine Control Unit (ECU) has detected a limitation in the engine's air intake system. This Level 2 monitoring fault indicates that the volume of air entering the engine is restricted, which can lead to a loss of power, increased fuel consumption, and black exhaust smoke. The ECU may force the engine into a protective limp mode to prevent potential damage.

Applies to these machines

  • CR9090

Check the cause

  1. Perform a visual inspection of the entire air intake system from the pre-cleaner to the turbocharger and into the engine for blockages, damage, or loose connections

  2. Inspect the primary and secondary air filters for dirt or clogs

  3. Check all air intake hoses and pipes for cracks, splits, or loose clamps

  4. Ensure the pre-cleaner bowl is empty and the aspirator is functioning correctly (check for exhaust backfeed into the air cleaner)

  5. Examine the turbocharger for damage to the compressor wheel or housing, hose leaks, and ensure the wastegate is not stuck

  6. Check for any other active fault codes related to boost pressure or intake manifold temperature sensors

Repair steps

  1. Replace air filters

    If the air filters are found to be dirty or clogged, replace them with new, genuine OEM filters.

  2. Repair intake leaks

    If any cracks, holes, or loose connections are found in the intake piping, repair or replace the damaged components. Ensure all clamps are securely tightened.

  3. Clear blockages

    Remove any debris or blockages found in the pre-cleaner or intake ducting.

  4. Address turbocharger issues

    If the turbocharger is found to be malfunctioning, it may need to be repaired or replaced. This is a complex task and may require a certified technician.

  5. Clear fault codes

    After completing the repairs, use a diagnostic tool to clear the fault code from the ECU's memory.

  6. Test operation

    Start the machine and operate it under normal conditions to ensure that the fault code does not reappear and that engine performance has returned to normal.

Parts you might need

(7)
  • Air Cleaner84334657

    Main air cleaner assembly

  • Primary engine air filter element

  • Air Intake Tube

    84122091

    150 mm length

  • Air Intake Tube

    87473992
  • Duct

    87108999
  • Hose Clamp

    214-1460
  • Dust evacuator valve for the air filter housing

Get help to fix this fault by requesting a quote

Browse other New Holland codes