New Holland 5014: PTO Disconnection Command Issued but PTO Speed Remains Above Zero

The system has received a command to disconnect the Power Take-Off (PTO), but the PTO speed is still above zero, indicating that the PTO has not properly disengaged.

1. 1

   The PTO engagement mechanism

2. 2

   The PTO speed sensor

3. 3

   The control signal to the PTO system

1. 1

   Verify the PTO engagement mechanism

   Check if the PTO is physically disengaged as expected after the command is issued.

2. 2

   Inspect the PTO speed sensor

   Ensure the sensor is functioning correctly and providing accurate speed readings to the system.

3. 3

   Check the control signal to the PTO system

   Confirm that the command to disconnect the PTO is being properly transmitted to the relevant component.