5703

New Holland 5703 – MIU / ECU: Pattern Switch - Short to Power

Issue description

The control system has detected an electrical fault in the pattern switch circuit where the voltage is higher than the normal operating range, indicating a short circuit to a power source. This condition can lead to unpredictable behavior or malfunctions in the system controlled by the pattern switch.

Applies to these machines

  • L220
  • C227
  • C232

Check the cause

  1. Verify the fault code 5703 is active using a service tool and check for any other related fault codes

  2. Check the battery for cleanliness, secure connections, and signs of damage or corrosion, as a faulty battery can cause electrical issues

  3. Visually inspect the wiring harness between the ECU/MIU and the pattern switch for abrasions, corrosion, or improper connections, paying close attention to the underside of the machine

Repair steps

  1. Disconnect power

    Disconnect the battery to prevent electrical damage or injury before beginning repairs.

  2. Locate and test the switch

    Identify the pattern switch (often a rocker switch or part of a joystick control handle). Test the switch itself for internal shorts according to manufacturer specifications.

  3. Test the wiring harness

    If the switch is operational, disconnect the harness from the ECU and the switch. Use a multimeter to test for continuity and check for a short between the signal wire and a power source.

  4. Repair wiring or replace switch

    Repair and insulate any broken or shorted sections of the wiring harness. If the pattern switch itself is faulty, replace it.

  5. Clear codes and test

    Reconnect the battery, clear the fault codes using a service tool, and operate the machine to ensure the fault does not reappear.

Parts you might need

(6)
  • Pattern Switch

    87634134

    Replaces 87640048. Verify fitment by serial number.

  • Pattern Switch

    84537211

    Fits C227 and C232 compact track loaders. Verify fitment by serial number.

  • Rocker switch. Verify fitment by serial number.

  • Verify fitment by serial number.

  • Pattern Switch

    D3NN13480A

    Verify fitment by serial number.

  • Pattern Switch

    YN50S01003P1

    Verify fitment by serial number.

Get help to fix this fault by requesting a quote

Browse other New Holland codes