Switch Level
Signal 1: >= 11 V
Material Note
RoHs compliant
Max. Line Length
30 m Eingänge
Shock Resistance
Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27
Relative Humidity
5 - 95 %
Dimensions W x L x H
41,8 mm x 60,5 mm x 20,9 mm
Oscillation Strength
Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6
Electrical Connection
Spring tension clamp
LABS (PWIS) Conformity
VDMA24364-B2-L
Switching Logic Inputs
PNP (Positive switching)
Nominal Altitude Of Use
<= 2000 m NHN
Ambient Temperature (°C)
-5 to 50
Bearing Temperature (°C)
-20 to 70
Input Debouncing Time (ms)
3
Characteristic Curves Inputs
acc. to EN 61131-2
Power Blackout Bridging (ms)
10
Corrosion Resistance Class KBK
0 - No corrosion stressing
Voltage Drop Sensor Supply (V)
1
Electrical Connection 1, Function
Digital input
Diagnostics Per Internal Communication
Kurzschluss/Überlast Power OUT PL
Electrical Connection 1, Fastening Type
Screw lock
Permissible Voltage Fluctuation Of Load
± 10 %
Electrical Connection 1, Connection Type
Multi tube holder
Fuse Protection Of Inputs (Short Circuit)
Internal electronic fuse Per module
Electrical Connection 1, Occupied Pin / Wire
24
Max. Cumulative Current Inputs Per Module (A)
0,2
CE Certificate (See Declaration Of Conformity)
nach EU-RoHS-Richtlinie
Electrical Connection 1, Number Of Pins / Wires
3
Electrical Connection 1, Tightening Torque (Nm)
0,7
Electrical Isolation Of Inputs Between Channels
no
Permitted Voltage Oscillations Electronics/sensors
± 25 %
Behaviour After End Of Overload Of The Sensor Supply
Automatische Wiederkehr (default)
Electrical Connection: Inlet, Conductor Cross-section
0.2 to 1.5
Nominal Operating Voltage DC Electronics / Sensor (V)
24
Electrical Connection: Inlet, Conductor Cross-section (AWG)
AWG28 - AWG16
Intrinsic Power Input Operating Voltage Electronics/sensors
typisch 4 mA
Electrical Connection: Outlet, Information On Conductor Cross-section
0,09 - 1,5 mm² für Leiter flexibel ohne Aderendhülse
