This bearing is a single-row deep-groove ball bearing with integral seals on both sides. It supports a rotating shaft within a housing, handling both radial and moderate axial loads in the host machine’s driveline or implement assembly. The sealed design retains grease and excludes coarse contaminants, which is critical in agricultural environments where dust and debris are present. A worn or contaminated bearing produces audible rumble and increased rotational resistance, leading to shaft misalignment and accelerated wear on adjacent components. The manufacturer machines the races and balls to the original dimensional tolerances, so the bearing seats correctly in the housing bore without the need for shimming or adapter sleeves. On installation, press the bearing onto the shaft using the inner ring face only, and ensure the outer ring is fully seated in the housing bore before applying load.