This bearing is a double-sealed, deep-groove ball bearing with a C3 internal clearance, designed for installation in the clutch assembly of a combine harvester. It supports the rotating shaft within the clutch housing, maintaining alignment and reducing friction between the input and output components. The C3 clearance allows the bearing to handle the thermal expansion and radial loads that occur during clutch engagement and disengagement. A worn bearing produces audible rumble or vibration from the clutch area and can cause shaft misalignment, leading to premature wear on the clutch disc and pressure plate. As a Timken-manufactured component, this bearing is ground to the same raceway geometry and seal-land dimensions as the original factory part, ensuring proper seating in the housing bore and correct preload on the shaft. When replacing, inspect the housing bore for scoring and replace the shaft seal if present.