Exceptionally efficient, compact and reliable AL-KO Drain 10000 Comfort submersible pump effortlessly pumps water with suspended particles and impurities up to 30 mm in diameter thanks to its large suction openings.
Pumps for dirty water are used when there is a need to get rid of contaminated liquids - for example after severe floods, from polluted ponds or tanks, and during dewatering of construction excavations. Then, in addition to water, the device must also pump impurities, which significantly increases the load on the material and the motor. It is good if it is an AL-KO pump. Thanks to the special impeller geometry, the Drain 10000 Comfort model can pump even heavily soiled water with a suspended particle content of up to 5% and impurities up to 30 mm in diameter. The maintenance-free motor, specially prepared stainless steel motor shaft and glass fibre reinforced polypropylene housing guarantee a long service life for AL-KO dirty water submersible pumps.
Testers write about our submersible pump: "With the AL-KO 10000 Comfort dirty water submersible pump you get a solid and well-thought-out pump for home and garden. We like the maintenance-free motor, good workmanship and the freely adjustable hose connection." The pump received a rating of 8.1 (maximum rating 10).
Very efficient dirty water submersible pump with a power of 650 W.
Exceptional impeller design enables extreme tasks to be performed.
Universal angled connector and hose nipple included.
Automatic float switch.
Maximum impurity diameter 30 mm, capacity 10000 l/h, delivery head up to 8 m.
Thanks to the convenient integrated carrying handle and 10 m cable, as well as the low weight of only 5.7 kg, the pump can be used both mobile and stationary - of course also for clean water. Thanks to its compact dimensions of 24.2 x 19.0 x 35.3 cm, durable housing and long-life motor, it is also ideal as a pond or rainwater tank pump. Due to the large inlet openings, the AL-KO Drain 10000 Classic model copes equally well with large impurities. Both clean liquids and those contaminated with particles up to 30 mm in diameter are efficiently and quickly pumped out. The specially prepared motor shaft, made of durable stainless steel, and the glass fibre reinforced polypropylene housing ensure a long service life for the device. With a power of 650 W and a capacity of up to 10000 l/h, pumping out and transferring takes place in a flash. The AL-KO Drain 10000 Comfort submersible pump is equipped with a float switch and automatically starts the pumping process when the appropriate water level is reached. The maximum immersion depth of the pump is 5 m. With a delivery head of up to 8 m, it allows even greater depths to be overcome. The pump outlet has a size of 1.25 inches, which is approximately 41.9 mm. The 90° elbow connector has a universal connection, and thanks to the included hose nipple, all available hose sizes can be connected. Note: This garden pump is not suitable for drinking water, but only for service water with a temperature below 35° C. It is also not suitable for use in salt water or water containing aggressive chemicals.