Switch Level
Signal 1: >= 11 V
Material Note
phosphorsäureesterfrei
Cover Material
PBT reinforced
Fastening Type
Permanently screwed
Screws Material
Nickel-plated steel
Max. Line Length
30 m Eingänge
Module Parameter
Verhalten nach Kurzschluss/Überlast am Ausgang
Shock Resistance
Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27
Channel Parameter
Eingangsentprellzeit
Diagnosis Via LED
(Eingänge-Ausgänge) Status pro Kanal
Relative Humidity
Not condensing
Dimensions W x L x H
50,1 mm x 107,3 mm x 57,5 mm
Oscillation Strength
Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6
Installation Position
arbitrary
Max. Setup Height (m)
3.500
LABS (PWIS) Conformity
VDMA24364-B2-L
Switching Logic Inputs
3-Drahtsensoren nach IEC 61131-2
Nominal Altitude Of Use
<= 2000 m ASL (> 79,5 kPa)
Switching Logic Outputs
PNP (Positive switching)
Ambient Temperature (°C)
-20 to 50
Bearing Temperature (°C)
-20 to 70
Fire Inspection, Material
UL94 V-0 (Gehäuse)
Input Debouncing Time (ms)
20
Max. Address Volume, Inputs
2
Reverse Polarity Protection
yes
Characteristic Curves Inputs
to IEC 61131-2 type 3
Max. Address Volume, Outputs
1
Output Delay With Ohmic Load
Signalwechsel 1->0: < 200 µs
Power Blackout Bridging (ms)
10
Characteristic Curves Outputs
to IEC 61131-2 type 0.5
Corrosion Resistance Class KBK
1 - low corrosion stress
Communication Interface, Protocol
AP
Max. Power Supply Per Channel (A)
0.5
Diagnostics Per Internal Communication
Unterspannung Last
Electrical Connection: Input, Function
Digital input
Electrical Connection: Outlet, Function
Digital output
Permissible Voltage Fluctuation Of Load
± 25 %
Nominal Operating Voltage DC Of Load (V)
24
Fuse Protection Of Inputs (Short Circuit)
Internal electronic fuse Per module
Fuse Protection Of Outputs (Short Circuit)
Internal electronic fuse Per channel
Intrinsic Power Input Operating Voltage Load
typisch 5 mA
Electrical Connection: Input, Connection Type
6x Dose
Max. Cumulative Current Inputs Per Module (A)
1,8
Behaviour After End Of Overload Of The Outputs
Keine automatische Wiederkehr
Electrical Connection: Outlet, Connection Type
2x socket
Max. Cumulative Current Outputs Per Module (A)
2
Electrical Isolation Of Inputs Between Channels
no
Electrical Connection Output, Connection Pattern
995384
Electrical Isolation Of Outputs Between Channels
no
Permitted Voltage Oscillations Electronics/sensors
± 25 %
Electrical Connection: Input, Connection Technology
M12x1 A-codiert nach EN 61076-2-101
Behaviour After End Of Overload Of The Sensor Supply
Automatische Wiederkehr
Electrical Connection: Input, Number Of Pins / Wires
5
Electrical Connection: Outlet, Connection Technology
M12x1 A-codiert nach EN 61076-2-101
Electrical Connection: Outlet, Number Of Pins / Wires
5
Nominal Operating Voltage DC Electronics / Sensor (V)
24
Intrinsic Power Input Operating Voltage Electronics/sensors
typisch 40 mA
Electrical Isolation Of Inputs Between Channel - Internal Communication
yes
Electrical Isolation Of Outputs Between Channel - Internal Communication
yes
Potential Separation Between The Supply Voltages Electronics/sensor Technology And Load/valves
yes
