STIHL - VB03-011-2000 - Petrol Water Pump WP 300

STIHL WP 300 water pump is a versatile device helpful for pumping water. In agriculture, it can be used to draw water from surface waters such as lakes, rivers, ditches, or ponds for irrigating crops. It can also be used to remove unwanted accumulations of water. The STIHL WP 300 operates with a maximum capacity of 616 l/min at a maximum suction height of up to 7 m and a maximum head of 33 m. The durable STIHL WP 300 water pump is powered by a powerful 4-stroke petrol engine. When it is cold, you can make starting easier by engaging the choke. This self-priming water pump has a stable frame, so it can operate stably on various surfaces, and the engine is protected from damage. Connecting hoses to the inlet and outlet ports is done using 2-inch connections. During water suction, the STIHL WP 300 pump is protected against contaminant particles in the water by a filter. The sucked-in particles can have a maximum grain size of up to 6 mm, then the risk of clogging the pump is very low. When water is drawn from surface waters, local regulations in this regard must be observed. The set does not include a suction and pressure hose. ENGINE PROTECTION AGAINST DAMAGE. As soon as the oil level drops below the level required for safe operation, the engine switches off automatically. Anti-vibration system. Vibration dampers mounted linearly on the engine and on the pump housing flange reduce mechanical stress on the entire device and ensure smooth operation even at high engine speeds. STIHL EHC engine. STIHL water pumps are equipped with powerful and reliable STIHL EHC 4-stroke petrol engines. Sturdy frame. The solid frame ensures good stability of STIHL water pumps on various surfaces and at the same time protects the engine from damage.