Thanks to the large suction openings, the compact and reliable AL-KO Drain 7500 Classic submersible pump effortlessly pumps water with suspended particles and impurities up to 30 mm in diameter.
Pumps for dirty water are used when there is a need to get rid of contaminated liquids - for example, after severe floods, from polluted ponds or tanks, and during dewatering of construction excavations. Then, in addition to water, the device must also pump impurities, which significantly increases the load on the material and the motor. It is good if it is an AL-KO pump. Thanks to the special impeller geometry, the Drain 7500 model can pump even heavily soiled water with a suspended particle content of up to 5% and impurities up to 30 mm in diameter. The maintenance-free motor, specially prepared stainless steel motor shaft, and glass-fiber-reinforced polypropylene housing ensure a long service life for AL-KO dirty water submersible pumps.
A durable submersible pump for dirty water with a power of 450 W.
The exceptional impeller design enables extreme tasks to be accomplished.
Universal angled connector and hose nipple included.
Automatic float switch.
Maximum impurity diameter 30 mm, output 7500 l/h, head up to 6 m.
Thanks to the convenient integrated carrying handle and a 10 m long cable, as well as a low weight of only 4.4 kg, the pump can be used both mobile and stationary - of course also for clean water. Thanks to its compact dimensions of 21.3 x 15.2 x 30.8 cm, robust housing, and long-life motor, it is also ideal as a rainwater tank pump. Due to the large inlet openings, the AL-KO Drain 7500 Classic model copes equally well with large impurities. Both clean liquids and those contaminated with particles up to 30 mm in diameter are efficiently and quickly pumped out. The specially prepared motor shaft, made of durable stainless steel, and the glass-fiber-reinforced polypropylene housing ensure a long service life for the device. With a power of 450 W and an output of up to 7500 l/h, pumping out and transferring takes place in no time. The AL-KO Drain 7500 Classic submersible pump is equipped with a float switch and automatically starts the pumping process when the appropriate water level is reached. The maximum submersion depth of the pump is 5 m. With a head of up to 6 m, it can overcome even greater depths. The pump outlet has a size of 1.25 inches, which is approximately 41.9 mm. The 90° elbow connector has a universal fitting, and thanks to the included hose nipple, all available hose sizes can be connected. Note: This garden pump is not suitable for drinking water, but only for service water with a temperature below 35° C. It is also not suitable for use in salt water or water containing aggressive chemicals.
